Lubrication Of Bearings; Spare Parts - PP3DP UP! mini User Manual

6. Maintenance

6.5 Lubrication of bearings

The bearings on the Up! Printer may occasionally require a bit of lubrication to
keep it operating smoothly. The recommended grease to use is lithium grease.
When lubricating the bearings, first clean off as much old grease as possible
from the bearings, and then apply new grease to the bearing and slide the
platform in the appropriate direction to spread the grease.

6.6 Spare parts

Almost all the plastic parts on the printer are printed by the Up! printer itself. If
you need to print spare parts for your printer, the files for all spare parts can be
found in the C:\Program Files (x86)\UP\Example\UP Spare Part folder
UP! mini 3D Printer User Manual 46