Floor Mats - GMC 2011 Sierra Denali Owner's Manual

10-100 Vehicle Care
Instrument Panel, Vinyl and
other Plastic Surfaces
To remove dust, a soft cloth
dampened with water can be used.
If a more thorough cleaning is
necessary, a clean soft cloth
dampened with a mild soap solution
can be used to gently remove dust
and dirt. Never use spot lifters or
removers on plastic surfaces.
Many commercial cleaners and
coatings that are sold to preserve
and protect soft plastic surfaces
may permanently change the
appearance and feel of the interior
and are not recommended. Do not
use silicone or wax-based products,
or those containing organic solvents
to clean the vehicle's interior
because they can alter the
appearance by increasing the
gloss in a non-uniform manner.
Some commercial products may
increase gloss on the instrument
panel. The increase in gloss may
cause annoying reflections in the
windshield and even make it difficult
to see through the windshield under
certain conditions.
Wood Panels
Use a clean cloth moistened in
warm, soapy water (use mild dish
washing soap). Dry the wood
immediately with a clean cloth.
Keep belts clean and dry.
WARNING
Do not bleach or dye safety belts.
It may severely weaken them.
In a crash, they might not be able
to provide adequate protection.
Clean safety belts only with mild
soap and lukewarm water.

Floor Mats

GM floor mats are designed for
use in GM vehicles.
Use the following guidelines for
proper floor mat usage.
Use the floor mat with the
correct side up. Do not turn
it over.
Do not place anything on top of
the driver side floor mat.
Use only a single floor mat.
Do not place one floor mat on
top of another.
Use only GM floor mats that are
designed specifically for this
vehicle.
When using replacement floor
mats, make sure they do not
interfere with the accelerator or
brake pedal.