GMC 2011 Sierra Denali Owner's Manual page 239

4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturer's
user guide.
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN number that was provided
in Step 3. After the PIN is
successfully entered, the system
prompts you to provide a name
for the paired cell phone. This
name will be used to indicate
which phones are paired and
connected to the vehicle.
See Listing All Paired and
Connected Phones later in this
section for more information.
6. Repeat Steps 1 through 5 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press and hold
two seconds.
2. Say Bluetooth.
3. Say List.
Deleting a Paired Phone
If the phone name you want to
delete is unknown, see Listing All
Paired and Connected Phones.
1. Press and hold
two seconds.
2. Say Bluetooth.
3. Say Delete. The system asks
which phone to delete.
4. Say the name of the phone you
want to delete.
Infotainment System
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all the available cell
phones were paired. Depending on
which cell phone you want to
connect to, you may have to use
for
this command several times.
1. Press and hold
two seconds.
2. Say Bluetooth .
3. Say Change phone.
for
7-51
for
If another cell phone is
found, the response will be
<Phone name> is now
connected.
If another cell phone is not
found, the original phone
remains connected.