Carrier ComfortChoice Edge Owner's Manual page 22

Programming a vacation schedule
8. Press the done button.
9. Close the thermostat door.
Activating your vacation program:
You must schedule a return date to activate your vacation settings before
leaving. The thermostat will begin following the vacation schedule after you've
selected the return date. On 12:00 AM on the return date, the thermostat will
automatically switch back to the follow programmed schedule.
1. Press the schedule button at the top until the arrow is next to vacation.
2. You will see the next day's date at the bottom of the screen under the
words return on. There is a box around the day. To set the date (D) you will
return home, press the up button and stop on the desired date.
3. If you need to change the month (M) for your return, press the button
under the month on the screen. The selection box will move to the month
number.
4. Press the up button to set the desired month.
5. Repeat this process to change the year (Y) if necessary.
. Press the done button. This will instruct the thermostat to begin the
vacation schedule immediately.
7. Close the thermostat door.
20 20