Prohibiting Disc Ejection - JVC KD-SH707 Instructions Manual

To play back the current track repeatedly
(One Track Repeat Play)
You can play back the current track repeatedly.
1 Press MODE (M) while
playing a disc. The unit
MODE enters the functions mode.
2 Press RPT (repeat) while still
in the functions mode, so
that the "REPEAT" flashes
on the display.
Then, each time you press
RPT, One Track Repeat Play
turns on and off alternately.
When One Track Repeat
Play is turned off, All Track
Repeat Play is activated.
When the repeat mode is turned on, the RPT
indicator lights up on the display.
To play back only intros (Intro scan)
You can play back the first 15 seconds of each
track sequentially.
1 Press MODE (M) while
playing a disc. This unit
MODE
enters the functions mode.
2 Press INT (intro scan) while
still in the functions mode,
so that "INTRO" flashes on
4
the display.
Then, each time you press
INT, intro scan play mode
turns on and off alternately.
• During intro scan play, track numbers flash.
• When the intro scan play ends, normal
playback resumes.
RPT (repeat) indicator
RPT

Prohibiting disc ejection

You can prohibit disc ejection and can lock a disc
in the loading slot.
While pressing SEL (select),
press and hold 0 for more than 2
seconds.
"NO EJECT" flashes on the
display for about 5 seconds, and
the disc is locked and cannot be
ejected.
Note:
If you press 0 while disc ejection is prohibited, the
control panel moves down, but the disc cannot be
ejected.
To return the display panel to its previous position,
press 0.
To cancel the prohibition and unlock the disc,
press and hold 0 for more than 2 seconds again,
while pressing SEL (select).
"EJECT OK" flashes on the display for about 5
seconds, and the disc is unlocked.
17