Lpg Cylinder Installation Inside Cabinet; Where Does The Lpg Cylinder Go; Inside Cabinet Requirements - Weber Spirit E-220 CLASSIC Owner's Manual

WHERE DOES THE LPG
CYLINDER GO?
The type and size of cylinder
you purchase will determine
if the cylinder can be located
inside or outside the base
cabinet. There are two
location options: inside the
cabinet within the cylinder
brackets, or outside the
cabinet on the ground.

INSIDE CABINET REQUIREMENTS

The LPG cylinder can be placed inside the grill cabinet
if the cylinder does not exceed the maximum size
requirements. The maximum size requirements for
cylinders installed inside the cabinet are:
Cylinder Capacity: 6 kg maximum
Cylinder Height: 465 mm maximum
Cylinder Width: 289 mm maximum
(rectangular footprint) or
318 mm maximum
(round footprint)
Also, the base of the cylinder must fit between the cylinder
brackets and rest flat on the bottom panel (1).
WARNING: If the LPG cylinder
does not meet the cylinder size
requirements for placing inside the
cabinet, do not attempt to place
or connect the cylinder inside the
cabinet. Place and connect the
cylinder outside the cabinet. Failure to
do so could cause damage to the hose
resulting in a fire or explosion, which
can cause serious bodily injury or
death, and damage to property.
Several possible cylinder models approved for installation
inside the cabinet are illustrated, with dimensions
included.
Maximum LPG cylinder
capacity INSIDE cabinet is
6 kg.
The length of hose must not
exceed 1.5 metres.
10
WWW.WEBER.COM
®

LPG CYLINDER INSTALLATION INSIDE CABINET

1