Table of Contents
Advertisement
The use of such devices may create a fire hazard.
21. Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that fireplace
plug fits tightly into outlet before each use. During use, check to make certain the fireplace
plug is not overheating. If necessary, have a qualified electrician check and / or replace the
wall outlet.
22. Do not place the fireplace near a bed, as objects such as pillows or blankets can fall off the
bed and be ignited by the fireplace.
23. Never clean this fireplace while it's plugged in. To disconnect, turn control to OFF, then
remove the plug from the outlet. Never pull the cord. Always hold the plug firmly & remove
from the outlet.
24. This fireplace is intended for supplemental heat and / or decorative purposes. Continuous
use for several hours can impact the performance & life of the fireplace.
25. It is not intended to be used in commercial, industrial or agricultural settings.
26. Do not use outdoors.
Getting Started
Remove the fireplace from the box.
•
Remove all the packaging and place it inside the box and either store or dispose of safely.
•
Package Contents
Electric Fireplace
•
Remote Control
•
Instruction Manual
•
Features
• Simulated Flame Insert, With Adjustable Flame
• 2 Heat Settings: 750W / 1500W
• Energy Efficient
• Consistent Heat from Floor To Ceiling
• Adjustable Electronic Thermostat
• Built-in Timer
• LED Display And Controls For Time And Temp.
• Dual heating Power Level
• Caster Wheels
• Overheating Protection, Auto Safety Shut-off
Quick Reference Guide
Prior to installation, please ensure that your power-outlet is suitable for your fireplace
•
against both voltage and capacity.
Your fireplace may emit a slight, harmless odor during its first use. This odor is a normal
•
condition caused by the initial heating of internal fireplace parts and it will not occur
again.
It is normal for fireplace to make rattling sound for a short duration of time, during its first
•
use.
If your fireplace does not emit heat, please ensure the fireplace Switch is on. For further
•
information, please refer to Troubleshooting section of this manual.
3
Advertisement
Table of Contents
