Majestic 33ISDG Installation And Operating Instructions Manual page 12

CLEARANCES and HEIGHT REQUIREMENTS
Figure 7 - Measuring Heat Resistant
Material for Mantel
No combustible materials
within 8" of opening.
Do not cover louvers.
Figure 9 - Unsafe Mantel Clearance
1
No combustible materials
within 8" of opening.
Do not cover louvers.
Hood
8"
6"
2 / "
1
2
4"
Hood
HEAT RESISTANT MATERIAL (MINIMUM REQUIRE-
MENTS) WITH NO WOODEN MANTEL OR OTHER COM-
BUSTIBLE PROjECTION
Heat resistant material (minimum requirements) with wooden mantel
or other combustible projection:
To install the heater with a wooden mantel shelf or other combustible
projection above, first measure the heat resistant material shown in
Figure 7.
12"
10"
8"
6"
/ "
2
1
2
Figure 8 - Minimum Mantel Clearance
Figure 9 is an example of an unsafe mantel installation. The mantel
projects 4" at 8" above the opening, exceeding the maximum
acceptable distance of 2
above the opening, exceeding the maximum acceptable distance
of 6".
If your mantel profile is unsafe, you may either:
• Raise the mantel to an acceptable height or,
10"
• Remove the mantel.
8"
26"
Example: A mantel may
14"
project from the wall
a maximum of 2
10"
minimum of 8" above
8"
the opening, and a maxi-
mum of 12" at a mini-
mum of 26" above the
opening.
1 / ". The mantel also projects 8" at 10"
2
1 / " at
2
23D8036