Hitachi SJ700B SERIES Quick Reference Manual page 42

(3) Code/data display and key operation in extended function mode U
The extended function mode U differs in operation from other extended function modes because the
extended function mode U is used to register (or automatically record) other extended-function codes
as user-specified U parameters.
Key operation and
transition of codes on
display (in monitor or
function mode)
*1 The content of the display varies depending on the
parameter type.
*2 To update numerical data, be sure to press the
key after changing the data.
STR
You cannot restore the
display with the
key.
STR
Key operation and
transition of codes on
display (in extended
function mode U)
Extended
function
mode U
FUNC
FUNC
STR
Pressing the
stores the value set here
in the corresponding U
parameter.
Key operation and transition
of codes on display (when
displaying extended-function
mode parameters from the
extended function mode U)
FUNC
or
FUNC STR
key
3 - 9
Chapter 3 Operation
Key operation and
transition of codes on
display (in monitor,
function, or extended
(Data display)
(*1) (*2)
Extended
function
mode A
FUNC
or
FUNC STR
Extended
function
mode B
STR
Pressing the key
reflects the value set here in
the corresponding parameter.
Note that the value is not
reflected in the corresponding
U parameter.
Extended
function
mode C
Extended
function
mode H
Extended
function
mode P
(Display with the
factory setting)
Monitor
mode
Function
mode