(1)
(2)
CAUTION!
Please check Mainboard JUMPER SETTING before
testing.
(1)CPU frequency jumper setting:
a. Jumper Mode: Set the jumpers following the information
printed on the motherboard or on the user manual.
b. Jumper Free Mode: Make sure the JEN jumper is on the
position of Jumper Free Mode and set all the DIP Switches
to OFF.
(2)Other Motherboard Function Setting :
Check the onboard Lan ,Audio,SCSI...etc. jumpers and make
sure they are ENABLE .
PS:If the jumper doesn't be set properly, it'll cause test
failure.
42