Berner Maxair Installation & Maintenance Instructions Manual page 11

Modes of Operation continued:
The following modes can be customized see "Programming the Intelliswitch" for more info.
For use on heated units only, requires a door
switch. When the temperature drops below the
thermostat set point and the door is closed, the
"PluS"
unit will activate on a low speed and provide
COMFORT
supplemental heating to the space. The unit will
PLUS
change to normal speed when the door is open.
If the thermostat is still not satisfied when the
door closes the unit will return to low speed until
the set point is reached.
Recommended for unheated units. This setting
will enable the air door to operate on Deluxe
"Pro1"
mode with a 1 minute time delay, 24 hours a
PROGRAM 1
day, 7 days a week.
See Appendix A page 18 for more detailed
information.
Recommended for heated units.
This setting will enable the air door to operate
on Deluxe mode with a 1 minute time delay from
"Pro2"
8:00 am – 5:00 pm.
PROGRAM 2
From 5:01 pm – 7:59 am, the unit will operate on
Comfort Plus with a 30 second time delay.
See Appendix A page 18 for more detailed
information.
Recommended for heated units. This setting
will enable the air door to operate on Auto
"Pro3"
mode with a 30 second time delay, 24 hours a
PROGRAM 3
day, 7 days a week.
See Appendix A page 18 for more detailed
information.
11
PLUS
PRO1
PRO2
PRO3