Sound Adjustments; Selecting Preset Sound Modes; (C-Eq: Custom Equalizer); Adjusting The Sound - JVC GET0260-015A Instructions Manual

Sound adjustments

Selecting preset sound modes

(C-EQ: custom equalizer)

You can select a preset sound mode suitable to
the music genre.
~
Ÿ
Indication For:
USER (Flat sound)
ROCK Rock or
disco music
CLASSIC Classical
music
POPS Light music
HIP HOP Funk or rap
music
JAZZ Jazz music
* 1 BAS: Bass; * 2 TRE: Treble;
* 3 LOUD: Loudness

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
Preset values
BAS * TRE * LOUD *
1 2 3
00 00 OFF
+03 +01 ON
+01 –02 OFF
+04 +01 OFF
+02 00 ON
+02 +03 OFF
2
Indication pattern changes
as you adjust the level.
Ex.: When "TRE" is selected
Indication
BAS*
4 (bass)
Adjust the bass.
TRE*
(treble)
4
Adjust the treble.
FAD*
5 (fader)
Adjust the front and rear
speaker balance.
BAL (balance)
Adjust the left and right
speaker balance.
LOUD*
(loudness)
4
Boost low and high
frequencies to produce a
well-balanced sound at low
volume level.
VOL*
(volume)
6
Adjust the volume.
4
* When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including "USER."
* 5
If you are using a two-speaker system, set
the fader level to "00."
6
* Normally the +/– buttons work as the volume
control. So you do not have to select "VOL"
to adjust the volume level.
7
* Depending on the amplifier gain control
setting. (See page 17 for details.)
Range
–06 (min.) to
+06 (max.)
–06 (min.) to
+06 (max.)
R06 (Rear only)
to
F06 (Front only)
L06 (Left only)
to
R06 (Right only)
LOUD ON
LOUD OFF
00 (min.) to
30 or 50 (max.)* 7
15