Pioneer PRO DJ LINK Setup Manual page 27

Setup manual (29 pages)

Table of Contents

Checking the connections

Checking the DJ player's link established by LAN connection (for the CDJ-2000)

Check that the player number indicated on the DJ player's screen is lit in white.

LINK OK

! If the player number indicated on the DJ player's screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the

connection procedure.

! Set the second DJ player on in the same way.

Checking the DJ player's link established by LAN connection (for the CDJ-900)

Press the DJ player's [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is

displayed for [LINK STATUS].

LINK OK

UTILITY

PLAYER No.

LINK STATUS

AUTO STANDBY

MIDI CHANNEL

! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure.

! Set the second DJ player on in the same way.

Checking the connected device(s)

1 Press one of the medium select buttons to check the connection with the respective device.

— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.

— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.

— To use a USB device connected by wire to the USB "A terminal": Press the [USB] button.

— To use an SD memory card: Press the [SD] button.

! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).

2 Press the [LINK] button.

BROWSE

TAG LIST

LINK