Pioneer PRO DJ LINK Setup Manual page 14

 Connecting the cables (LAN cable and audio cables)
1 Connect the switching hub and DJM-900nexus by LAN cable.
2 Connect the LAN cable and audio cables.
Connect in such a way that the DJ player's player number and the channel number of the terminals to which the DJ mixer's audio cables are connected are the same number.
Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the switching hub is connected to the DJ mixer
POWER
R L
Checking the connections
 Checking the DJ player's link established by LAN connection
Check that the player number indicated on the DJ player's screen is lit in white.
LINK OK
! If the player number indicated on the DJ player's screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
 Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.
Check that the player number displayed on the DJ player's screen is the same as the channel number that lights on the DJ mixer's channel level indicator.
If the numbers are different, fix the connections.
CDJ-2000nexus
! Set the second DJ player on in the same way.
14
En
CH 4
PHONO CD/ LINE
L
RETURN
R L
CONTROL OFF POWER (MONO)
ON
R
SEND
R L (MONO)
AC IN
CDJ-2000nexus DJM-900nexus
LINK NG
DJM-900nexus
CH 3 CH 2
LINE CD/ LINE LINE CD/ LINE
L L
CH 3 CH 2 CH 1
LINE CD/ LINE LINE CD/ LINE PHONO CD/ LINE
L L L
MIC2 MIDI OUT
GND SIGN
SIGNAL GND SIGNAL GND
R R R
R R
BOOTH DIGITAL
MASTER1 MASTER2 REC OUT
R L L L TRS CH2 CH1
BOOTH
MASTER2 REC OUT R L
MASTER
LINK
OUT
IN
L L L TRS
R
L R L R
R R
CH4 CH3
1 GND 2 HOT
3 COLD
TRIM TRIM
OVER OVER
10 10
7 9 7 9
HI HI
4 4
2 2
1 1
0 0
/ /
-26 6 -26 6
- 1 - 1
MID MID
- 2 - 2
EQ/ EQ/
- 3 - 3
ISO ISO
- 5 - 5
/ /
- 7 -26 6 - 7 -26 6
LOW LOW
- 10 - 10
- 15 - 15
- 24 - 24
POWER
R L
CDJ-2000nexus
CONTROL