Pioneer PRO DJ LINK Setup Manual page 11

 Connecting the cables (LAN cable and audio cables)
1 Connect the wireless router and DJM-900nexus by LAN cable.
2 Connect the LAN cable and audio cables.
Connect in such a way that the DJ player's player number and the channel number of the terminals to which the DJ mixer's audio cables are connected are the same number.
Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to the DJ mixer
POWER
R L
Checking the connections
 Checking the DJ player's link established by LAN connection
Check that the player number indicated on the DJ player's screen is lit in white.
LINK OK
! If the player number indicated on the DJ player's screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
 Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.
Check that the player number displayed on the DJ player's screen is the same as the channel number that lights on the DJ mixer's channel level indicator.
If the numbers are different, fix the connections.
CDJ-2000nexus
! Set the second DJ player on in the same way.
CH 4
PHONO CD/ LINE
L
RETURN
CONTROL OFF POWER R L (MONO) GND
ON
R
MASTER1
SEND
R
R L
(MONO)
AC IN
1 GND
CDJ-2000nexus DJM-900nexus
LINK NG
DJM-900nexus
CH 3 CH 2
LINE CD/ LINE LINE CD/ LINE
L L
CH 3 CH 2 CH 1
LINE CD/ LINE LINE CD/ LINE PHONO CD/ LINE
L L L
POWER
MIC2 MIDI OUT
SIGN
SIGNAL GND SIGNAL GND
R R R
R R
MASTER2 REC OUT BOOTH DIGITAL
CH2 CH1
L L L TRS
MASTER2 REC OUT R L BOOTH
MASTER
LINK
OUT
IN
L L L TRS
R
L R L R
R R
CH4 CH3
2 HOT
3 COLD
TRIM TRIM
OVER OVER
10 10
7 9 7 9
HI HI
4 4
2 2
1 1
0 0
-26 / 6 -26 / 6
- 1 - 1
MID MID
- 2 - 2
EQ/ EQ/
- 3 - 3
ISO ISO
- 5 - 5
- 7 -26 / 6 - 7 -26 / 6
LOW LOW
-10 -10
-15 -15
-24 -24
CONTROL
R L
CDJ-2000nexus
11
En