Table of Contents
Advertisement
TAPE OPERATIONS
Listening to a cassette
You can play back type I (normal) tapes.
1
Insert a cassette into the cassette
compartment.
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, pressing TAPE 23 turns on the
unit and starts tape play automatically. However,
it is not recommanded to leave the cassette in the
compartment when turning off the power. It may
damage the tape head and the cassette.
2
Select the tape direction.
10
The unit turns on and tape
play starts automatically.
Each time you press
TAPE 23, the tape direction
alternates between forward
(
) and reverse
(
).
Tape direction
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The
source changes to the previously selected one.
If you change the source, tape play also stops
(without ejecting the cassette this time).
• You can also eject the cassette by pressing 0
while the unit is turned off.
To fast-forward and rewind a tape
Press and hold
than one second to fast-forward
the tape.
When the tape reaches its end,
the tape is reversed and playback
starts from the beginning of the
other side.
Press and hold 4
second to rewind the tape.
When the tape reaches its end, playback of the
same side starts.
To stop fast forward and rewind at any
position on the tape, press TAPE 23.
Tape play starts from that position on the tape.
Notes:
• When one side of the tape reaches its end during
play, the other side of the tape automatically starts
playing. (Auto Reverse)
• When the tape reaches its end while fast-forwarding,
the tape direction will be changed automatically.
¢ for more
for more than one
Advertisement
Table of Contents
