JVC GET0125-001A Instructions Manual page 40

This operation is only possible when
using JVC MP3-compatible CD changer
(CH-X1500).
To go to a track/file quickly (+10 and –10
buttons)
1
Press MODE to enter the functions mode
while playing a disc.
2
Press +10 or –10.
* The first time you press +10 or –10 button,
the track/file skips to the nearest higher or
lower track/file with a track/file number of
multiple ten (ex. 10th, 20th, 30th).
Then each time you press the button, you can
skip 10 tracks/files (see "How to use the +10
and –10 buttons" below).
• After the last track/file, the first track/file will
be selected, and vice versa.
Note:
If the current playing disc is an MP3 disc, files are
skipped within the same folder.
How to use the +10 and –10 buttons
• Ex. 1: To select track/file number 32 while
playing track/file number 6
(Three times)
Track/File 6 \ 10 \ 20 \ 30
• Ex. 2 : To select track/file number 8 while
playing track/file number 36
(Three times)
Track/File 36\ 30 \ 20 \ 10
40
"MODE" flashes on the upper
part of the display.
To skip 10 tracks/files*
forwards to the last track/file
To skip 10 tracks/files*
backwards to the first track/file
(Twice)
\ 31 \ 32
(Twice)
\ 9 \ 8
To skip to the next or previous folder
(only for MP3 discs)
Press 5 (up) while playing an
MP3 disc, to go to the next folder.
Each time you press the button
consecutively, the next folder is
located, and the first file in the
folder starts playback.
Press ∞ (down) while playing an
MP3 disc, to go to the previous
folder.
Each time you press the button
consecutively, the previous folder
is located, and the first file in the
folder starts playback.
To show the disc information for CD Text
and MP3 discs
This is possible only when connecting a JVC CD
changer equipped with CD Text and/or MP3 disc
information reading capability.
Select text display mode while playing a
CD Text or an MP3 disc.
• For details, see page 23 about CD Text disc
information and page 27 about MP3 disc
information.