Mp3 Operations; Playing An Mp3 Disc - JVC GET0125-001A Instructions Manual

MP3 OPERATIONS

Refer also to "CD OPERATIONS" on pages
20 to 23.

Playing an MP3 disc

1
Open the control panel.
Notes:
• When an external component is connected to
the AUX input jack on the control panel, be
careful of handling a disc.
• When a disc is already in the loading slot,
pressing CD CD-CH (AUX) turns on the unit
and starts playback automatically.
2
Insert an MP3 disc into the loading
slot.
3
Close the control panel by hand.
All files will be played repeatedly until you
stop playback.
26
The unit turns on,
draws the disc and
starts playback
automatically.
The display changes to show the following:
CD–in indicator Current source indication*
Total folder Total file
number number
MP3 indicator
Ex.: When the disc contains 19 folders and
144 MP3 files
* When "CLOCK" is set to "ON" (see page 34),
the current indication will soon change to the
clock time.
Notes:
• MP3 discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appears. (See also page 27.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc playback starts from where
playback has been stopped previously.