Advertisement
Listening to the radio
~
Ÿ
] "FM" or "AM"
"ST" lights up when receiving an FM stereo broadcast with
sufficient signal strength.
Manual search
"M" flashes, then press the
button repeatedly.
[Hold]
When an FM stereo broadcast is hard
to receive
1
[Hold]
2
] <TUNER> ] <MONO> ] <MONO ON>
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
[Hold]
2
] <TUNER> ] <SSM> ] <SSM 01 – 06> /
<SSM 07 – 12> / <SSM 13 – 18>
"SSM" flashes and local stations with the
strongest signals are searched and stored
automatically.
To preset another 6 stations, repeat the above
procedure by selecting one of the other six SSM
setting ranges.
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number "04."
1
] "92.50MHz"
2
[Hold]
"PRESET MODE" flashes.
3
] Selects preset number "04."
"P04" flashes and "MEMORY" appears.
Listening to the external components
You can connect an external component to the AUX
(auxiliary) input jack on the control panel.
• Make sure <AUX ON> is selected for the
<SRC SELECT> = <AUX IN> setting on page 3.
1
] "AUX IN"
2
Turn on the connected component and start
playing the source.
Selecting a preset station
1
or
2
Assigning title to a station
You can assign titles to 30 station frequencies (FM
and AM) using 8 characters (maximum) for each title.
1
] "FM" or "AM"
2
[Hold]
] Show the title entry screen.
3
] Selects a character.
4
] Move to the next (or previous) character
position.
5
Repeat steps 3 and 4 until you finish entering
the title.
6
To erase the entire title, press and hold DISP after
step 2, then press the control dial.
Available characters
A
B
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
S
T
U
V
W
X
Y
1
2
3
4
5
6
7
—
/
<
>
Space
Changing the display information
Station name * = Frequency =
Clock = (back to the beginning)
* If no title is assigned to a station, "NO NAME" appears
for a few seconds.
Using the remote controller
5 U / D ∞ : Changes the preset stations
2 R / F 3 : Searches for stations
3.5 mm (3/16") stereo mini
plug (not supplied)
Portable audio player,
etc.
Listening to the disc
~
] Turn on the power.
Stopping playback and ejecting the disc
"NO DISC" appears.
Press / SOURCE to listen to another
playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
Caution on volume setting:
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc to
avoid damaging the speakers by the sudden increase
of the output level.
Selects folder of the MP3/
WMA
Selects track
Fast-forwards or reverses
the track
[Hold]
Selecting a track/folder
1
2
I
For MP3/WMA discs, select the desired folder, then
R
the desired track by repeating step 2.
Z
0
• To return to the previous menu, press BACK.
8
9
Listening to the USB device
This unit can play MP3/WMA tracks stored in a USB device.
~
] Turn on the power.
If a USB device has been attached...
Pressing / SOURCE turns on the power and playback
starts from where it has been stopped previously.
• If a different USB device is currently attached,
playback starts from the beginning.
Stopping playback and detaching the
USB device
Straightly pull it out from the unit.
"NO USB" appears. Press / SOURCE to listen to
another playback source.
You can operate the USB device in the same way
you operate the files on a disc.
Caution on volume setting:
USB devices produce very little noise compared with
other sources. Lower the volume before playing
a USB to avoid damaging the speakers by sudden
increase of the output level.
2 – EN
Ÿ
All tracks will be played repeatedly until you change the source or
eject the disc.
Selecting the playback modes
You can use only one of the following playback
modes at a time.
1
2
[Hold]
] "REPEAT" j "RANDOM"
3
REPEAT
TRACK RPT
: Repeats current track
FOLDER RPT
: Repeats current folder
RANDOM
FOLDER RND
: Randomly plays all tracks of
ALL RND
: Randomly plays all tracks
To cancel repeat play or random play, select
"RPT OFF" or "RND OFF."
Changing the display information
Disc title/Album name/performer (folder name)*
= Track title (file name)* = Current track
number with the elapsed playing time = Current
track number with the clock time = (back to the
beginning)
* If the current disc is an audio CD, "NO NAME" appears.
If an MP3/WMA file does not have Tag information
or <TAG DISPLAY> is set to <TAG OFF> (see page 3),
folder name and file name appear.
Using the remote controller
5 U / D ∞ : Selects folder of the MP3/
2 R / F 3 : Selects track
2 R / F 3
[Hold]
Ÿ
USB input jack
USB memory
All tracks will be played repeatedly until you change the source or
detach the USB device.
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device
repeatedly while "READING" is shown on the
display.
• Do not start the car engine if a USB device is
connected.
• This unit may not be able to play the files
depending on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up to
avoid losing the data.
• Do not leave a USB device in the car, expose to
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
• Some USB devices may not work immediately after
attaching USB device or turn on the power.
• For more details about USB operations, see page 4.
current folder, then tracks of
next folders
WMA
: Fast-forwards or reverses the
track
Advertisement
