Selecting A Single Picture And Printing It - Panasonic Lumix DMC-FZ28 Operating Instructions Manual

Note
Do not use any other USB connection cables except the supplied one. Use of cables other than
•
the supplied USB connection cable may cause malfunction.
Turn the camera off before connecting or disconnecting the AC adaptor (optional).
•
Before inserting or removing a card, turn the camera off, and disconnect the USB connection
•
cable.
You cannot switch between the built-in memory and the card while the camera is connected to
•
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect
the USB connection cable to the printer again.
Press 2/1 to select the picture and then press
[MENU/SET].
The message disappears in about 2 seconds.
•
Press 3 to select [PRINT START] and then press
[MENU/SET].
Refer to P169
•
print the pictures.
Press [MENU/SET] to cancel printing halfway.
•
Disconnect the USB connection cable after printing.
•
Connecting to other equipment

Selecting a single picture and printing it

for the items which can be set before starting to
- 167 -