For details on [REC] mode menu settings, refer to P29.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Applicable modes:
[AUTO]/[100]/[200]/[400]/[800]/[1600]
ISO sensitivity
Recording location
(recommended)
Shutter speed
Noise
Note
When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of value set
•
with [ISO LIMIT SET].
ISO sensitivity will adjust automatically depending on brightness within the maximum setting of
•
[ISO400] ([ISO800] when the flash is used) when [AUTO] is selected for [ISO LIMIT SET].
The setting is not available when [INTELLIGENT ISO] is being used. ([
•
If picture noise becomes a problem, we recommend that you take pictures after lowering the
•
maximum ISO sensitivity level, increasing the setting for [NOISE REDUCTION] under
[PICT.ADJ.], or lowering the setting for each of the items other than [NOISE REDUCTION].
(P132)
For details on [REC] mode menu settings, refer to P29.
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
Applicable modes:
[AUTO]/[200]/[400]/[800]/[1600]
Note
The upper limit of the ISO sensitivity can be set.
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
•
amount of picture noise.
It will work when the [SENSITIVITY] is set to [AUTO] or [INTELLIGENT ISO] is set to [ON].
•
Advanced (Recording pictures)
[SENSITIVITY]
³±´²
When it is light (outdoors)
[ISO LIMIT SET]
³±´²
100
Slow
Less
- 120 -
1600
When it is dark
Fast
Increased
] is displayed.)