Panasonic Lumix DMC-FZ28 Operating Instructions Manual page 35

[MF ASSIST]
Refer to P86 for details.
•
q [ECONOMY]
Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
•
[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.
•
[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
Press any button to turn on the LCD monitor again.
•
[AUTO LCD OFF] does not work while operating menu or playback zoom.
•
AV and HD output is turned off while LCD monitor is turned off.
•
[PLAY ON LCD]
Refer to P64 for details.
•
Preparation
In manual focus, the assistance screen appears on the centre of
the screen to facilitate focusing on the subject.
[OFF]:
[MF1]:
The centre of the screen is enlarged.
[MF2]:
The centre of the screen is enlarged over the whole screen.
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [POWER SAVE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
If you selected the Viewfinder in a recording mode, the display will
automatically switch to the LCD monitor when reviewing or
playing back the pictures.
[OFF]/[ON]
- 35 -