∫ Setting the white balance manually
1
Select [
] or [
1
2
Aim the camera at a sheet of white paper etc. so that the
frame in the centre is filled by the white object only and then
press [MENU/SET].
∫ Finely adjusting the white balance [
You can finely adjust the white balance when you cannot acquire the desired hue by
setting the white balance.
You can set from the quick menu.
•
1
Select [WHITE BALANCE] and then press 1
Press 1 again if [
•
2
3/4/2/1 to adjust the white balance and then press
Press
[MENU/SET].
2 :
A (AMBER: ORANGE)
1 :
B (BLUE: BLUISH)
3 :
G
_
(GREEN: GREENISH)
4 :
M
`
(MAGENTA: REDDISH)
Note
If you finely adjust the white balance to A (amber), the white balance icon on the LCD monitor/
•
Viewfinder will change to orange. If you finely adjust the white balance to B (blue), the white
balance icon on the LCD monitor/Viewfinder will change to blue.
If you finely adjust the white balance to G_ (green) or M` (magenta), [_] (green) or [`]
•
(magenta) appears beside the white balance icon on the LCD monitor/Viewfinder.
Select the centre point if you are not finely adjusting the white balance.
•
The white balance fine adjustment setting is reflected in the picture when using the flash.
•
You can finely adjust the white balance independently for each white balance item.
•
The white balance fine adjustment setting is memorised even if the camera is turned off.
•
The white balance fine adjustment level returns to the standard setting (centre point) in the
•
following cases.
When you reset the white balance in [
–
When you reset the color temperature manually in [
–
Advanced (Recording pictures)
] and then press 1.
2
(P31)
], [
] or [
1
2
1
- 122 -
]
] is selected.
] or [
]
2
]