4.2
Radiant-heated cooking hobs with split input electronics
ca. 3 s
Start
Stored Error Codes
DGS-TDS-N 12.08 U. H. / A. B. © Electrolux
Hob is off:
Press On/Off
until Displays
are off again;
one beep
Service mode
Display
Firmware
test
Interface
left and
right
In split input electronics, the firmware version is shown in both of the timer
displays and has to be identical
With pressing the Plus-Key the last 3 stored Errors are displayed in serial
mode
If no failure is stored only "E" is displayed.
No Demo
mode active
Firmware
Power
board
- 8 -
Demo mode
active
599 714 137 EN