Configuration; Firmware; Position Of The Input Electronics; Split Interfaces For Induction Hobs - Electrolux COOKERS Service Manual

2.4

Configuration

The input electronics is self-configuring. This configuration defines:
- Power / size of the cooking zone
- Key-lock and stop & go function
- Power levels (9 / 14)
If the configuration is not matching to the interface functions are not available or the display of
the 7-Segement /Bargraph is not logic.
2.5

Firmware

The firmware is the software to control the interface independent on the configuration.
3.

Position of the input electronics

3.1

Split interfaces for induction hobs

3.2

Split input electronics for hobs with radiant heating

Power electronic
DGS-TDS-N 12.08 U. H. / A. B. © Electrolux - 5 -
Induction coils
Kite Split
Silicone carrier
Kite Split
Silicone carrier
Carrier
599 714 137 EN