How To Use The Set-Up Menu - JVC TM-15L1D Instructions Manual

How to Use the SET-UP MENU

The SET-UP MENU contains the initial settings of the monitor.
Press CHROMA/
PHASE while
pressing MENU.
Operation guide
Shows the buttons for
each operation.
7 To exit the menu:
NOTE:
• The menu automatically disappears in about
30 seconds after the last menu operation.
• Some items may not appear on the menu.
Those items are not available for the current
input or the current input signal.
• "HOUR METER X100h" shows the total hors of
use of the monitor. This item is not selectable.
SET-UP MENU
7 PICTURE SUB ADJ.
7 COLOR TEMP.
7 SIZE/POSI. ADJ.
7 REMOTE SETTING
7 NO SYNC FUNCTION
7 TALLY SELECT
7 STATUS DISPLAY
7 CONTROL LOCK
(☞ page 17)
1 Select
2 Next
1 Select
2 Adjust
Next
(When selecting "USER1"
or "USER2" in 2)
(Only when "SCAN SIZE" is "USER")
1 Select
2 Next
Ex. When aspect ratio is 4:3
1 Select
2 Next
1 Select
2 Next
1 Select
2 Adjust
7 To go back to the previous screen:
1 Select
2 Adjust
1 Select
"reset"
2 Perform
"reset"
1 Select
2 Adjust
1 Select
2 Adjust
1 Select
2 Adjust
1 Select
2 Adjust
15