How To Use The Set-Up Menu - JVC LM-150 Instructions Manual

How to Use the SET-UP MENU

The SET-UP MENU contains the initial settings of the monitor.
Press CHROMA/
PHASE while
pressing MENU.
Operation guide
Shows the buttons for
each operation.
7 To exit the menu:
NOTE:
• The menu automatically disappears in about
30 seconds after the last menu operation.
• Some items may not appear on the menu.
Those items are not available for the current
input or the current input signal.
• "HOUR METER X100h" shows the total hors of
use of the monitor. This item is not selectable.
14
SET-UP MENU
7 PICTURE SUB ADJ.
7 COLOR TEMP.
7 SIZE/POSI. ADJ.
7 NO SYNC FUNCTION
7 REMOTE SYSTEM
7 STATUS DISPLAY
7 CONTROL LOCK
(☞ page 16)
Select
Next
Select
Adjust
Next
(When selecting "USER1" or
"USER2" in 2)
Select
When video signals are input and
"SCAN SIZE" is "USER"
Next
Ex. When "ASPECT" is "4:3"
When analog RGB signals are
input from the computer
Select
Next
Select
Adjust
7 To go back to the previous screen:
Select
Adjust
Select
"reset"
Perform
"reset"
Select
Adjust
Select
Adjust
Select
Adjust
Select
Adjust