JVC TM-15L1D Instructions Manual page 11

5 SDI terminals
g AUDIO 1 terminal (pin jack)
Input terminal for the analog audio signals.
• Use the SDI 1 terminal for the video connection.
h AUDIO 2 terminal (pin jack)
Input terminal for the analog audio signals.
• Use the SDI 2 terminal for the video connection.
i SDI 1 terminal (BNC)
Input terminal for the SD SDI signals.
• Use the AUDIO 1 terminal for the audio
connection.
j SDI 2 terminal (BNC)
Input terminal for the SD SDI signals.
• Use the AUDIO 2 terminal for the audio
connection.
k SDI SW. OUT terminal (BNC)
Output terminal for the SD SDI signals.
The SDI signal of the current input (SDI 1 or SDI
2) is re-clocked and output.
NOTE:
• When the input other than SDI 1 or SDI 2 is selected,
the SDI signal of the input selected last time is re-
clocked and output from this terminal.
g h i j k
5
6
6 Security slot
Install a security wire to this slot.
11