Signode BXT2 Operation Manual page 36

SIGNODE BXT2
Signode Engineered Products Warrants that a new Signode strapping tool will operate per functional
specifi cations for a period of sixty (60) days after the date of shipment to the owner's place of business. Normal
wearing parts, as outlined in the Operation, Parts & Safety manual, are covered by a thirty (30) day warranty
unless, in Signode's judgement, these parts have been subjected to abnormal or extreme usage. Signode's sole
liability hereunder will be to repair or replace, without charge, F.O.B. Signode's Glenview,Illinois plant, any tool
which proves to not operate per functional specifi cations within the stated period. Signode reserves the right to
replace any tool which proves not to operate per functional specifi cations with a new or like-new tool of the same
model if in Signode's judgement such replacement is appropriate.
Any new replacement tool provided to an owner will carry a full sixty (60) day warranty. Any warranty
repaired tool or like-new replacement tool will carry a warranty for the balance of the time remaining on the
initial sixty (60) day warranty. This warranty will be extended to compensate for the time the tool is in Signode's
possession for warranty repairs.
This warranty is void as to any tool which has been: (I) subjected to mis-use, misapplication, accident,
damage, or repaired with other than genuine Signode replacement parts, (II) improperly maintained, or adjusted,
or damaged in transit or handling; (III) used with improperly fi ltered, unlubricated air or improper strapping material,
(IV) in Signode's opinion, altered or repaired in a way that affects or detracts from the performance of the tool.
SIGNODE MAKES NO WARRANTY, EXPRESSED OR IMPLIED, RELATING TO MERCHANTA-BILITY, FITNESS
OR OTHERWISE EXCEPT AS STATED ABOVE AND SIGNODE'S LIABILITY AS ASSUMED ABOVE IS IN
LIEU OF ALL OTHERS ARISING OUT OF OR IN CONNECTION WITH THE USE AND PERFORMANCE OF
THE TOOL. IT IS EXPRESSLY UNDERSTOOD THAT SIGNODE SHALL IN NO EVENT BE LIABLE FOR ANY
INDIRECT OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, DAMAGES WHICH MAY
ARISE FROM LOSS OF ANTICIPATED PROFITS OR PRODUCTION, SPOILAGE OF MATERIALS, INCREASED
COSTS OF OPERATION OR OTHERWISE.
Considerable effort has be made to ensure that this product conforms to our high quality standards.
However, should you experience any diffi culties, please contact your Sales Representative providing
samples and the manufacturing code specifi ed on the tool.
PART # DESCRIPTION
LUBRICANTS
008556 LS-1236 AIR LINE OIL
422792 WHITE LUBRIPLATE GR-132 GREASE PNEUMATIC PARTS, AIR CYLIN., AIR VALVES, O-RINGS
422793 BLACK LUBRIPLATE 3000W GREASE
425239 RED MOBILITH SHC 007 GREASE
432322 EP ACCROLUBE GREASE
ADHESIVES
274111 LOCTITE #380 BLACK MAX
422794 LOCTITE #222 PURPLE
422795 LOCTITE #242 BLUE
422796 LOCTITE #271 RED
422797 LOCTITE #609 GREEN
CLEANING BRUSHES
023963 SMALL BRUSH
269589 LARGE BRUSH
36
SIGNODE
NEW TOOL WARRANTY
SIGNODE ENGINEERED PRODUCTS
Hand Tool Division
3620 W. Lake Avenue, Glenview, Illinois 60025
AREA OF USE
AIR MOTORS, AIR VALVES
MOVING EXTERNAL PARTS, JAWS, LINKS
INTERNAL GEARS
HIGH FRICTION CONTACT PARTS
PERMANENT, FLAT SURFACE PART CONTACT
LOW STRENGTH, SCREWS 1/4" (6MM) OR SMALLER SIZES
MEDIUM STRENGTH SCREWS 5/16" (8MM) OR LARGER
HIGH STRENGTH, SEMI-PERMANENT SCREWS APPLI.
PERMANENT, CURVED SURFACE PART CONTACT
FEEDWHEEL & GRIPPER TEETH
FEEDWHEEL & GRIPPER TEETH
Thank you for your help.
07.09