Subaru Tribeca 2011 Quick Reference Manual page 5

Seating
Power Driver Seat:
8-way Adjust
1. Forward/Backward, Angle
and Height
Move the switch toward the front or rear
to move the seat forward or backward.
Pull the switch up or push down on the
front of the switch to adjust the angle of
the seat cushion. Pulling the switch up or
pushing down on the rear of the switch
will adjust the height of the seat cushion.
2. Seatback
Move the switch in the corresponding
direction to adjust the angle of
the seatback.
Midway Stopping Feature
for 2nd Row Seats
The 2nd row seats are equipped with
a midway stopping feature on the
sliding mechanism. Release the midway
stopping feature by pushing the lever
located on the outside of the 2nd row
seat forward and slide the seat.
2
1
Power Driver's Seat:
Memory
(if equipped)
You can memorize two seat positions.
To memorize seat positions:
3. Press the "SET" button.
4. Within five seconds after pressing the
"SET" button, press the "1" or "2" button.
A buzzer will sound one time to inform
you that the memorizing is finished.
To move the seat to a memorized position
with the vehicle selector lever in "P" (Park)
position, press either the "1" or "2" button.
The seat will move to the stored position.
4 3
3 3