Table of Contents
Advertisement
ACCESSO
A
I ES
(Must be purchased separately)
nmMmtW*iimim::ti/@Mm:N?HM1mtJM:Wt:tiIrl:i::fil:·:: • •
· : ~ : @Wi.{<:\·/?::)i·
The accesaori .. on this page have not been tested by Factory Mutual.
STRAINER (AIR or PAINT) 202-271
52 bar (750 psi) MAXIMUM WORKING PRESSURE
With 60 mesh filter element.
~~
See instruction manual 306-655.
~
'-..
3/8npt~
3/8
npt INLET
~~~:: OUTLET
HIGH VOLUME AIR REGULATOR 206-199
0-9 bar (0-125 psi) Regulated Pressure
14 bar (200 psi) Steel Pressure Gauge
1/2 npt
~I
,
1/2npt
-,~
\~
.~
FILTER and MOISTURE SEPARATOR 202-680
12.6 bar (180 psi) MAXIMUM WORKING PRESSURE
With 1/2 npt(f) inlet, (2) 1/4 npt(m) outlets, and (2)
1/4 npt regulated outlets. With a porous bronze 50
micron filter and a 100 micron mesh inlet strainer. See
instruction manual 306-273.
(-,
"'-/
AIR LINE FILTERS
17.5 bar (250 psi) MAXIMUM WORKING PRESSURE
Reusable 40 micron filter with drain cock for cleaning
and drying air in spray systems.
108-148 3/8 npt(f) inlet and outlet.
108-149 1/2 npt(f) inlet and outlet.
REMOTE SWITCH & SIGNAL LIGHT 728-386
FILTER-REGULATOR ASSEMBLY 217-07&
14 bar (200 psi) MAXIMUM WORKING PRESSURE
With 1/2 npt(f) inlet, 1/4 npt(m) regulated outlets. With
a porous bronze 40 micron filter and a 100 micron mesh
inlet strainer. See instruction manual 307-476.
STAINLESS STEEL FLUID PRESSURE REGULATORS
17 bar (250 psi) MAXIMUM WORKING PRESSURE
0.3-6.8 bar (5-100 psi) REGULA TED PRESSURE
1/4 npt air inlet (Model 214-980 only), 3/8 npsm fluid in-
let, 3/8 npt fluid outlet and 1/4 npt gauge port.
SPRING OPERATED FLUID REGULATORS
214-896 Without pressure gauge and mounting tube.
214-708 With 6.8 bar (100 psi) pressure gauge and
gauge mounting tube.
214-971 With 6.8 bar (100 psi) chrome plated gauge
and stainless steel gauge mounting tube.
AIR OPERATED FLUID REGULATOR
214-980 1 bar (15 psi) MAXIMUM INBOUND AIR
PRESSURE
906-800 0-60 psi FLUID REGULATOR
906-800 EXTENDED LIFE REGULATOR
AIR LINE LUBRICATORS
17.5 bar (250 psi) MAXIMUM WORKING PRESSURE
See instruction manual 307-316.
214-847 3/8 npt inlet and outlet.
214-848 1/2 npt inlet and outlet.
214-849 3/4 npt inlet and outlet.
PAINT RESISTANCE METER 722-886
Used with 722-860 to measure resistivity. See instruc-
tion manual 307-263.
PAINT PROBE 722-860
Used with 722-886 resistivity meter. See instruction
manual 307-263.
BLEED-TYPE MASTER AIR VALVE (REQUIRED)
21 bar (300 psi) MAXIMUM WORKING PRESSURE
Relieves air trapped in the air line between the pump air
inlet and this valve when closed.
107-141 3/4 npt(m x f) inlet and outlet
107-142 1/2 npt(m x
f)
inlet and outlet
307-896 19
Advertisement
Table of Contents
