Optional Mounting - Dickinson SEA-B-QUE LARGE Operator's Manual

Optional Mounting

#15-150A
#15-150F
#15-187
#15-150P
Visit www.dickinsonmarine.com
Low pressure Retrofit
The control on the Sea-b-Que will need to be changed to a low pressure control (#15-
193), and a low pressure (11" water column) regulator (#19-151) needed for the propane
tank.
Cooking
The removable drip tray must be installed prior to cooking.
build-up in the grease tray or in the base of the sea-b-que. The porcelain enamel cooking
surface plates should be sprayed or covered with cooking oil to prevent food from
sticking. Accumulated grease will burn off if the cooking plates are turned over.
Diagrams
#8 x 3/8 screws & #8 nuts
Rail Kit
Fishing Rod Holder Mount Kit
Taff Rail Kit
Scotty Mount Kit
for pics and details
Diagram B
Igniter
Diagram D
Handles
#10 x ¾ screws
Do not allow grease to
Diagram A
Lower Assembly
#10 nuts
#10 L'washers
Diagram E
Thermometer
#6 x ¼ screws