Led Display On/Off - Elation EPAR QA User Instructions

EPAR QA 8 Channel Mode - DMX Values and Functions
Channel Value
1
0 - 255
2
0 - 255
3
0 - 255
4
0 - 255
5 1 - 255
6
0 - 15
16 - 255
1 - 255
7
0 - 127
128 - 159
160 - 191
192 - 223
224 - 255
8
0 - 255
Channel 1, 2, 3, & 4 will not work, when Channel 5 is being
used.
When using Channel 7, Channel 6 will control the speed of the
color changing.
Elation Professional - www.elationlighting.com - EPAR QA Instruction Manual Page 14
Function
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
AMBER
0% - 100%
COLOR MACROS
PLEASE SEE 1 CHANNEL MODE
STROBING/PROGRAM SPEED
NOTHING
STROBING
SLOW - FAST
PROGRAM SPEED SLOW - FAST
MODE
OFF
AUTO MIX
3 COLOR JUMP
7 COLOR JUMP
SOUND ACTIVE
MASTER DIMMER
0% - 100%
EPAR QA

LED Display On/Off:

To set the LED display to turn off after 10 seconds, press the MODE
button until ds-X is displayed, "X" representing either 1 or 2. Press
the UP or DOWN button so that ds-2 is displayed, now the display
will turn off after 10secs. Press any button for at least 5secs. to turn
the display on again. Be advised though that the display will turn off
automatically after 10 seconds of inactivity.
ds-1= LCD display on at all times.
ds-2= LCD display shuts off after 10 seconds.
Operating Modes:
You can use the EPAR QA in four ways:
• Macro Mode - There are 64 color macros to choose from.
• Auto Mode - There are 9 built in programs to choose from.
• RGBA mode - Control the intensity of all four colors adjusting the
intensity to your desire.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the Elation® Show Designer™.
Macro Mode:
1. Plug the fixture in and press the MODE button until "C-XX" is dis-
played. "XX" representing a number between 0-64.
2. There are 64 macros to choose from. Select your desired macro by
pressing the UP and DOWN buttons.
Program Mode:
1. Plug the fixture in and press the MODE button until "A-XX" is dis-
played. "XX" representing a number between 1-09 or AL.
2. There are 9 built-in programs to choose from or you can select
"A-AL" and run all 9 programs. Select your desired program by
pressing the UP and DOWN buttons. You can set your program
speed by following the next set of instructions.
Program Mode Speed Adjustment:
1. To adjust the speed of your program press the MODE button until
"P-XX" is displayed.
2. Press the UP or DOWN buttons to make the adjustmetns. "P-01" is
the slowest speed, "P-16" the fastest speed. When the display
reads "P-So" the Auto mode is running by sound activity.
Elation Professional - www.elationlighting.com - EPAR QA Instruction Manual Page 7
Operating Instructions