Charging Battery - SoftBank 930CA User Manual

Battery & AC Charger
1

Charging Battery

Using AC Charger
Use only SoftBank-specified AC Charger
separately). In this guide, the ZTDAA1 model AC Charger is
referred to as AC Charger.
"
Blades
External
Device Port
3
AC Charger
1
-16
" ZTDAA1 "
"
Port Cover
1
2
Release Tabs
Connector
1
Open Port Cover
See P. 1-15.
2
Insert Charger connector into External Device
Port
(sold
3
Extend Charger blades and plug into an AC
Outlet
Charging Indicator lights while charging. When
charging is complete, Indicator goes out.
4
Disconnect connector from handset
Press and hold Release Tabs to remove connector.
5
Close Port Cover
6
Unplug Charger from AC Outlet
Note
Battery can only be charged while inserted in handset.
When Charging Indicator and Display Indicator
Charge Unusual Stop Charge appears, disconnect handset
from AC Charger and remove battery. Set up handset and
Charger and start charging again. If the same error occurs, AC
Charger may be faulty. Contact SoftBank Customer Center,
Customer Assistance (P. 15-52).
When Charging Indicator and Display Indicator
flashing, handset temperature is unsuitable for charging
(Temperature Monitoring). Wait until handset cools down.
go out and
are