Bar Code Reader; Scanning Bar Codes - SoftBank 930CA User Manual

Bar Code Reader

JAN codes and QR codes can be
scanned by Bar Code Reader using
handset camera.
About JAN & QR Codes
JAN Code
A bar code made of vertical lines (bars)
with different widths and spaces in
between, representing numbers.
Handset can scan 8-digit (JAN8) and
13-digit (JAN13) bar codes.
QR Code
A two-dimensional code representing
alphanumerics, kanji, kana, or
pictographs. Some QR codes are made
up of several data areas that are
scanned as individual QR codes and
then automatically combined as one QR
code.
11
11
-16

Scanning Bar Codes

Position handset camera at a distance of
6 to 8 cm from the bar code.
1
d d
Tools
d
Code Reader
2
Frame the bar code in the
recognition field
Bar Code Scanning Window
Scanning starts automatically.
, , and indicate the corners
of the recognition field.
To Cancel Scanning
d d
OK
To Adjust Zoom
h j
(Zoom out) or (Zoom in)
To Scan a QR Code Made of
Several Data Areas (QR Codes)
d
OK
code
Repeat this step to scan other QR
codes.
Bar
All component QR codes must be
scanned in order to access or save
scanned data on handset.
3
Check scanned data
To Discard Scanned Data
t
YES
4
u
Store
d
OK
Tip
A JAN code/QR code must be
accurately focused and be enlarged to
fill the recognition field.
Scanning may take a while.
Some bar codes may not be scanned
depending on the size, version or print
quality, or due to scratches, stains,
damage or the reflection of light.
(twice) Scan a QR
d
d
YES
d