Usim Pins - SoftBank 930CA User Manual

USIM Card

USIM PINs

There are two security codes for USIM Cards: PIN1 and PIN2.
PIN1
PIN1 is a four- to eight-digit code to prevent unauthorized
handset use by a third party.
Default PIN1 is 9999.
PIN1 can be changed (P. 4-2).
When PIN1 Code Entry Set is set to ON, PIN1 must be entered
each time handset is turned on to be used.
PIN2
PIN2 is required to reset total call cost or to set a maximum
limit to call costs.
Default PIN2 is 9999.
PIN2 can be changed (P. 4-2).
PIN Lock & Cancellation (PUK)
If PIN1 or PIN2 is incorrectly entered three times
consecutively, PIN Lock is activated, limiting handset use to
specific functions. Enter Personal Unblocking Key
(PUK1/PUK2) to cancel PIN Lock.
For information on PUK, contact SoftBank Customer Center,
General Information (P. 15-52).
Note
If PUK1 is incorrectly entered ten times consecutively, USIM Card
is locked and handset is disabled.
If PUK2 is incorrectly entered ten times consecutively,
operations requiring PIN2 entry are all disabled.
Write down your PUK.
To cancel USIM Card lock, contact SoftBank Customer Center,
General Information (P. 15-52).
1
1
-11