Regency P36D-NG1 Owners & Installation Manual page 15

REGENCY
Because of the extreme heat this fi replace emits, the mantel clearances are critical.
Combustible mantel clearances from top of unit are shown in the diagram below.
Note: A non-combustible mantel may be installed at a lower height if the framing is made of metal studs covered with a non-combustible board.
These drawings are to scale at 1:6 (one inch = 6 inches)
Mantel can be installed anywhere in shaded area or higher using the above scale.
Note: Ensure the paint that is used on the mantel and the facing is "heat resistant" or the paint may discolour.
®
Regency P36D-1 Zero Clearance Direct Vent Gas Fireplace
® SERIES COMBUSTIBLE MANTEL CLEARANCES
INSTALLATION
15