Advertisement
STEP 4: Program The Bypass
STEP 5: Finish up!
Test all functions. After confirming that everything works properly, secure the remote start module and all the wires
connected to it. Make sure none of the wires interferes with any of the moving parts under the dash. Replace the plastic
panel that surrounds the ignition switch.
Cap off or tape the ends of any wires you're not using to prevent accidental grounding or other contact. Be particularly
careful with the unused heavy-gauge wires in the remote start's power harness. Now gather up all your wiring and neatly
bundle it together using zip ties or electrical tape. Find a secure place to put the remote start module and use zip ties to
secure it.
4 |
P a g e
Advertisement
