Recording Mode Setting; Hand Strap Attachment; Lens Cover Detachment - JVC LYT0002-0A1A Instructions Manual

Digital video camera
Table of Contents

Advertisement

14
LCD
monitor
Recording mode indicator

Hand Strap Attachment

The provided Hand Strap helps you to keep a firm
hold on the camcorder. Make sure you never hold
the camcorder without using the Hand Strap.
Eyelet
Hand strap
1
ATTACH HAND STRAP
Slide the strap through the eyelet, pulling
firmly to ensure secure attachment.
Set POWER to
"REC".
SP-LP recording
mode switch
SP
LP
SP
1
2
GETTING STARTED

Recording Mode Setting

Set depending on your preference.
1
SET RECORDING MODE
Set SP•LP switch. "LP" (Long Play) is more
economical, recording at 2/3 the speed of "SP"
(Standard Play).
•Insert Editing or Audio Dubbing is impossible
on a tape recorded in the LP mode.
NOTES:
If the recording mode is switched during
recording, the playback picture will be blurred at
the switching point.
It is recommended that tapes recorded in the LP
mode on this camcorder be played back on this
camcorder.
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.

Lens Cover Detachment

When using an optional conversion lens or lens
filter (commercially available), you must first detach
the lens cover.
1
DETACH LENS COVER
Turn the lens cover in the direction of the
arrow to detach it.
•To re-attach it, turn it in the opposite
direction of the arrow.
•Do not forcefully re-attach the lens cover as
this may damage its ridge, making further use
of the lens cover impossible.
•Take care so that dust does not get on the
lens.
(Cont.)
Lens cover

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gr-dvm1

Table of Contents