Table of Contents
Advertisement
60
Random Assemble Editing
Using the RM-V708U or RM-V710U remote control, you can use P.AE/Effects and make an original edited
tape.
Source tape (Camcorder)
1
MAKE CONNECTIONS
Connect the Docking Station to your VCR and
make sure that the playback picture and sound
are available on the connected TV (
2
START SOURCE PLAYBACK
(IF NECESSARY)
First turn the Power Dial to "PLAY". Press PLAY
and then press R.A. EDIT ON/OFF on the
remote control. Make sure to point the remote
control at the Docking Station's sensor.
• The Random Assemble Editing Menu appears
on the TV screen.
3
EXECUTE FADE/WIPE IN
(IF NECESSARY)
Press FADE/WIPE.
• Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
• You can't use a Picture Wipe/Dissolve at the
beginning of Program 1, or at the end of the
last scene.
To AUDIO input jacks (L/R)
AUDIO and
VIDEO cables
To AUDIO output
jacks (L/R)
Red
White
Yellow
To VIDEO output jack
S-VIDEO cable
To S-VIDEO output jack
Core filter
To EDIT jack
NOTES:
When using a JVC VCR with a remote pause
terminal, connect the editing jack on the Docking
Station to the VCR's remote pause terminal using
pg. 52).
an editing cable.
If you use a JVC VCR not equipped with a remote
pause terminal or a non-JVC VCR, connect the
Docking Station's editing jack to the remote
control's remote pause terminal using an editing
cable.
If the VCR has an S-Video input terminal, connect
it using an S-Video cable.
If the VCR has only one audio input terminal,
connect it using a conversion plug (not provided).
When using the provided cable, make sure you
connect the end of the cable with the core filter to
the Docking Station.
For camcorders sold in the U.K., set the VIDEO
OUT select switch of Cable adapter as required:
either to "CVBS" (with the direct VCR connection)
or to "Y/C" (with the RGB converter connection).
To Operate The VCR With The Remote Control . . .
..... press and hold SHIFT, then press the
EDITING
Red
White
Yellow
To VIDEO
input jack
To S-VIDEO
input jack
VIDEO OUT
select switch
(Y/C or CVBS)
To remote pause jack
Editing cable
RM-V708U or
RM-V710U
New tape (VCR)
appropriate control button.
(Cont.)
Cable adapter (provided
only with U.K. models)
If your VCR has the 21-pin
AV input connector
(SCART), use the provided
cable adapter.
VCR
(Recording deck)
T
W
Advertisement
Table of Contents
