Installing The Battery Pack - JVC LYT0002-0A1A Instructions Manual

Digital video camera

Hide thumbs

Table of Contents

NOTES:

If you connect the camcorder's DC cord to the

adapter during battery charging, power is

supplied to the camcorder and charging stops.

When using the AC Power Adapter/Charger, be

sure to use the supplied power cord only.

The AC Power Adapter/Charger is for use with the

BN-V812U Battery Pack only.

When charging the Battery Pack for the first time

or after a long storage period, the Charge

Indicator may not light. In this case, remove the

Battery Pack from the AC Power Adapter/Charger,

then try charging again.

Since the AC Power Adapter/Charger processes

electricity internally, it becomes warm during use.

Be sure to use it only in well-ventilated areas.

** Charging Environment

Perform charging where the temperature is between

10° and 30°C. (20°–25°C is the ideal temperature

range for charging.) If the environment is too cold,

charging may be incomplete.

Continuous Shooting

Continuous shooting is possible for approximately

60 minutes, under the following conditions:

• A BN-V812U Battery Pack is in use

• The temperature is approximately 20°C/68°F

However, . . .

• If the temperature is below 10°C/50°F, or

• If zoom or Record/Standby are engaged repeat-

edly, continuous shooting capability is reduced

significantly. Before extended use, it is recom-

mended that you prepare enough battery packs to

cover 3 times the planned shooting time.