Table of Contents
Advertisement
PLAYBACK
Basic Playback
You can watch what you've recorded in the LCD monitor.
LCD monitor
PUSH-OPEN
1
OPEN LCD MONITOR
Press PUSH-OPEN to open the LCD monitor.
2
SELECT OPERATION MODE
Turn the Power Dial to "PLAY" while pressing
down the lock button located on the dial.
3
REWIND TAPE
Press 2. "2" is displayed on the LCD
monitor. If you rewind all the way to the end of
the tape, it stops automatically.
4
VIEWING RECORDING
Press 46. "46" is displayed on the LCD
monitor and the recorded footage can be
viewed.
3
5
END PLAYBACK
Press
. Set the Power Dial to "OFF".
5
•When turning to "OFF", it is not necessary to
press down the lock button.
To Perform High-Speed Search . . .
..... press 2 or 3 after pressing 46. The tape
will move at approximately 9 times the normal
playback speed. Watch in the LCD monitor
and, when you reach the spot you want to see,
press 46 and normal playback resumes.
NOTES:
You can also perform a High-Speed Search by
pressing and holding 2 or 3 during the PLAY
mode. The search continues as long as you hold
the button. Once you release it, normal playback
resumes.
A slight mosaic effect appears on screen during
High-Speed Search. This is not a malfunction.
The sound is not available during High-Speed
Search.
VOLUME
Speaker
STOP PLAY REW
IND/DISPLAY
Playback Sound
You can hear sound from the speaker or using
headphones connected to the headphones connector
during playback. To adjust the sound volume, press
the VOLUME button. The sound volume indication is
displayed in the LCD monitor. Press "+" to turn up
the volume, or "–" to turn it down.
Still Playback
To temporarily stop playback, press 46. Press again
to resume playback. If still playback continues for
more than about 3 minutes, the camcorder's Stop
mode is automatically engaged. After 5 minutes in
the stop mode, the camcorder's power is automati-
cally turned off.
Print Of Scenes
It is possible to print out recorded scenes using an
optional video printer. Attach the camcorder to the
Docking Station and connect the station to a video
printer. Operate video printer using the LCD
monitor. When connecting the station's PRINTER
connector (
output connector, the date and time code are not
displayed in the LCD monitor. If you want to print
out a scene with its date, connect the video printer's
video output connector to TV and operate the video
printer using a TV monitor.
Power lamp
Lock button
Power Dial
FF
MENU
BRIGHT
pg. 76) to the video printer's video
49
Advertisement
Table of Contents
