Canon Legria mini Instruction Manual page 160

Wireless Connections Using an Access Point
• If you have previously configured and saved a connection
to an access point, the camcorder will connect automati-
cally to the last access point used.
• If no connections to access points have been saved in the
camcorder, the message [Save the access point] will
appear on the screen. Touch [OK] to configure and save a
new access point connection (step 2 in
Using an Access Point
this procedure.
2
Camcorder: When the wireless connection is success- Camcorder: When the wireless connection is success- Camcorder: When the wireless connection is success-
fully established, [Connected] will appear on the cam- fully established, [Connected] will appear on the cam- fully established, [Connected] will appear on the cam-
corder's screen.
• You can touch [View Information] to view the access • You can touch [View Information] to view the access • You can touch [View Information] to view the access
point's SSID, connection protocol, and the camcorder's IP point's SSID, connection protocol, and the camcorder's IP point's SSID, connection protocol, and the camcorder's IP
address and MAC address. address and MAC address. address and MAC address.
3
Computer: Start your preferred media player software Computer: Start your preferred media player software Computer: Start your preferred media player software
and select your camcorder's model name (Canon LEG- and select your camcorder's model name (Canon LEG- and select your camcorder's model name (Canon LEG-
RIA mini) from the list of media servers. RIA mini) from the list of media servers. RIA mini) from the list of media servers.
• On standalone media players and other devices, connect
the device to the home network and select your cam-
corder's model name from the list of media servers.
4
Computer: Play back the movies and photos.
• Interval scenes with the
(A 162) before continuing with 162) before continuing with 162) before continuing with
icon will not be shown.
160
Wi-Fi Connection