Canon Legria mini Instruction Manual page 204

Trouble?
- The camcorder may be set to recording mode. Disconnect
the optional HTC-100 High Speed HDMI cable, set the cam-
corder to playback mode and then restore the connection.
- Video and audio will not be output from the camcorder while
Wi-Fi functions are in use.
The computer does not recognize the camcorder even though
the camcorder is connected correctly.
- Disconnect the USB cable and turn off the camcorder. After - Disconnect the USB cable and turn off the camcorder. After - Disconnect the USB cable and turn off the camcorder. After
a short while, turn it on again and restore the connection. a short while, turn it on again and restore the connection. a short while, turn it on again and restore the connection.
- Connect the camcorder to a different USB port on the com- - Connect the camcorder to a different USB port on the com- - Connect the camcorder to a different USB port on the com-
puter.
Cannot save recordings on my computer Cannot save recordings on my computer Cannot save recordings on my computer
- When the memory card contains too many recordings (Win- - When the memory card contains too many recordings (Win- - When the memory card contains too many recordings (Win-
dows – 2,500 photos/movies or more, Mac OS – 1,000 dows – 2,500 photos/movies or more, Mac OS – 1,000 dows – 2,500 photos/movies or more, Mac OS – 1,000
photos/movies or more), you may not be able to transfer photos/movies or more), you may not be able to transfer photos/movies or more), you may not be able to transfer
recordings to a computer. Try using a card reader. recordings to a computer. Try using a card reader. recordings to a computer. Try using a card reader.
Wi-Fi Functions Wi-Fi Functions Wi-Fi Functions
Refer also to the instruction manual of your access point and Refer also to the instruction manual of your access point and Refer also to the instruction manual of your access point and
other devices you will use.
Cannot connect with the access point.
- Check that the access point is working correctly.
204