System" Screen - JVC KY-F560 Instruction Manual

"SYSTEM" Screen

Settings in bold are factory settings
Item
"ASPECT
RATIO"
"NEGATIVE"
"PIXEL
COMPEN"
"H PHASE"
"SC COARSE"
"SC FINE"
"PAGE BACK"
For setting the screen size for recorded video signals.
"4:3" : Image output at aspect ratio of 4:3.
"16:9" : Image output at aspect ratio of 16:9.
The vertical resolution deteriorates as compared to the
images of 4:3.
Signals output from the [VIDEO OUT] terminal can be output as negative signals.
"ON" : Outputs negative signals.
"OFF" : Outputs normal video signals.
For setting whether to perform white spot correction.
"CANCEL" : Do not perform white spot correction.
"EXECUTE" : Perform white spot correction.
☞ Page 26 'White Spot Correction'
Adjust the horizontal (H) phase of this unit with respect to signals input to the
[GENLOCK IN] terminal (external sync signals).
Increase value : Adjusts horizontal phase back.
Decrease value : Adjusts horizontal phase ahead.
{Variable Values : –128 - 0 - +127}
Coarse tune the subcarrier (SC) phase of this unit with respect to signals input to
the [GENLOCK IN] terminal (external sync signals).
Increase value : Adjusts phase back.
Decrease value : Adjusts phase ahead.
{Variable Values : 0˚, 90˚, 180˚, 270˚}
Fine tune the subcarrier (SC) phase of this unit with respect to signals input to the
[GENLOCK IN] terminal (external sync signals).
Increase value : Adjusts phase back.
Decrease value : Adjusts phase ahead.
{Variable Values : –128 - 0 - +127}
Press the [SET] button to return to the "MENU" screen when cursor is at this
position.
Function/Variable Values
E-41