Various Modes Of Shooting; Shooting The Computer Monitor - JVC KY-F560 Instruction Manual

4. Various Modes of Shooting

Shooting the Computer Monitor

When shooting images of computer monitors or displays, horizontal bands will appear on the screen. To
eliminate the bands, it will be necessary to align the shutter speed with the scanning frequency of the
monitor.
Computer Monitor
3. 4.
- - - EXPOSURE - - -
I R I S MODE
MA N U A L L EVE L
GA I N
L EV L E
SHUT TER
L EVE L
ADVANCED EXPOSURE . .
PAGE BACK
"EXPOSURE" Screen
5. 6.
- - - EXPOSURE - - -
I R I S MODE
MA N U A L L EVE L
GA I N
L EV L E
SHUT TER
L EVE L
ADVANCED EXPOSURE . .
PAGE BACK
Note
Vertical scanning frequency may vary with computer types and there are cases when bands may not be fully
eliminated. In addition, frequency may also differ depending on the software used.
E-24
1.
2.
3.
Band
4.
5.
6.
AUTO
- - - - - -
ST E P
0 d B
STEP
NO R M A L
7.
8.
AUTO
- - - - - -
ST EP
0 d B
V. SCAN
1 / 5 0 s
Press the [MENU] button for 1-2 seconds.
The "MENU" screen will be displayed.
Use the [ / ] buttons to select "EXPOSURE..", then press
the [SET] button.
Use the [ / ] buttons to select "SHUTTER", then press the
[SET] button.
The set value starts blinking and adjustment is possible.
Use the [ / ] buttons to set value to "V.SCAN", then press
the [SET] button.
Use the [ / ] buttons to select "LEVEL", then press the [SET]
button.
Use the [ / ] buttons to adjust the shutter speed. Pay atten-
tion to the screen
If black bands are visible : use the [ ] button to lower the shut-
If white bands are visible : use the [ ] button to increase the
When bands are decreased to the minimum, press the [SET]
button. This will be recorded in the memory of the unit.
Press the [MENU] button for 1-2 seconds.
The normal screen will be displayed.
ter speed
shutter speed