Table of Contents
Advertisement
Basic System Diagram
U S
.
Quick Start
A Check to ensure that the connections are correct before turning on the power.
B Connect the AC adapter to the DC 12 V terminal. The POWER lamp lights up.
C Initialization is activated after the camera is powered on. The camera lens moves to both the horizontal
and vertical limit positions. Initialization is complete after it has moved back to the front view position.
Memo :
Operation is possible when the light of the STANDBY lamp has turned off.
0
If Preset 1 is preconfigured, the camera will move to the Preset 1 position.
0
Use as a USB camera U S
This camera can be used as a USB camera by connecting the USB3.0 port to a PC using a USB cable
(sold separately).
Memo :
Streaming from the camera will not take place while it is connected to a PC via USB.
0
To start video streaming, disconnect the USB connection with the PC and restart the camera.
0
20
Basic System Diagram
3.5 mm audio cable
(Sold separately)
3.5 mm audio cable
(Sold separately)
RS485 Cable (Sold Separately)
RS232C Cable (Supplied)
RS232 Cable (Sold Separately)
3G-SDI cable (Sold separately)
HDMI cable (Sold separately)
USB cable (Sold separately)
LAN cable (Sold separately)
AC adapter (Supplied)
Power cord (Supplied)
DC 12V IN
Computer, TV,
VCR with Audio
Input Jack,
Router or Hub,
Speaker
Microphone, etc.
Advertisement
Table of Contents
