Using The Sonicwall Setup Wizard - SonicWALL SOHO TZW Getting Started Manual

Using the SonicWALL Setup Wizard

Alert! Your Web browser must support Java and HTTP uploads in order to manage the SOHO
TZW. Internet Explorer 5.0 or higher, as well as Netscape Navigator 4.0 or higher, are
recommended.
Alert! Make sure your Cable or DSL modem is connected to the WAN port on your SOHO TZW
before using the Setup Wizard.
1. Launch your Web browser.
2. Type 192.168.168.168 in the Location or Address field of your browser and press Enter
or your keyboard. SonicWALL Setup Wizard launches.
If you cannot connect to the SonicWALL, check the following:
• Did you correctly enter the SonicWALL LAN IP address in your Web browser?
• Is the SonicWALL connected to the same network as your computer?
• Have you changed the TCP/IP network settings on your computer?
Alert!.Certain browser configuration may not launch the Setup Wizard. In this case, you must
log into the SOHO TZW by typing admin in the User Name field and password in the
Password field, and then clicking Login. Click the Setup Wizard on the Network>Setting
page after logging into your SOHO TZW.
Page 12 SOHO TZW Getting Started Guide