SonicWALL SOHO TZW Getting Started Manual page 7

Connecting the SonicWALL to the Network
If you already have a wired LAN, connect the SOHO TZW to the LAN port on the SOHO TZW
using the Category 5 Standard Ethernet cable. If you don't have a wired Ethernet network,
connect the Red (crossover) Ethernet cable to the LAN port on the SOHO TZW and the
Ethernet port on a computer. This connection provides access to the SOHO TZW's Web
Management Interface for configuring the SOHO TZW.
Connect one end of the gray Ethernet cable to your DSL modem or cable modem. Connect
the other end of the gray Ethernet cable to the WAN port of the SonicWALL. The link LED
lights indicating an active connection. If the LED does not light, try the Crossover cable.
Connect one end of the provided Crossover cable to the Ethernet port of your computer.
Connect the other end of the cable to the LAN port of your SonicWALL. The link LED lights
indicating an active connection. If the LED does not light, try the Ethernet cable.
Page 6 SOHO TZW Getting Started Guide