THOMSON Gateway Configuration Manual page 62

WMM displays whether WMM is enabled or disabled. For more information about WMM, see
" WMM" on page
i
WMM or Wi-Fi Multi Media enhances QoS at wireless driver level. It provides a mechanism
to prioritize wireless data traffic to and from the associated (WMM capable) stations.
>
Security:
Broadcast Network Name. By default, the Thomson Gateway broadcasts its network name, allowing
you to easily recognise your wireless network in the list of available networks. Once you have
configured your wireless stations, it is recommended to disable this feature by clearing this check
box.
Allow New Devices allows you to change the access control used by the Thomson Gateway.
Security Mode allows you to select a security mode for your wireless network. The following
encryption methods are supported by the Thomson Gateway:
>
The Wired Equivalent Protocol (WEP)
>
WPA-Pre Shared Key (WPA-PSK)
i
The default WEP key and the default WPA key are printed on the Thomson Gateway bottom
label.
!
Before configuring the Thomson Gateway encryption, make sure you have determined an
encryption method that is common to ALL your wireless stations.
56
37.
Thomson Gateway Wireless Configuration
Chapter 7
E-DOC-CTC-20060609-0001 v2.0